Your new post is loading...
Your new post is loading...
|
Scooped by
Gust MEES
|
Make your Maker-Life less stressful with some tips and tools You were certainly in some situations where you were shouting and swearing about situations when things didn't work as well as expected as you didn't have the right tools to finish a project... Well, I encountered as well such situations on projects and… Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
The new feature will allow Pi owners to write Arduino Sketches to interact with sensors, motors, electronic boards and other hardware attached to the Pi's GPIO pins.
Arduino Sketches can now be used to program the Raspberry Pi, marking a moving together of two of the biggest maker platforms. The cloud-based Arduino Create platform is designed to simplify the creation of Internet of Things applications. Want to use the $35 Raspberry Pi computer to build your own hardware but only ever used Arduino boards? Well you're in luck.
If you know how to write programs to control hardware using Arduino boards you can now use the same language to control hardware attached to the Pi, the co-founder of the Arduino Project Massimo Banzi announced yesterday.
Banzi revealed a new feature in the cloud-based Arduino Create service that will compile Arduino Sketches — programs typically used to interact with Arduino boards and attached hardware — into a form that can be run on a Raspberry Pi.
The feature will allow Pi owners to write Arduino Sketches to interact with sensors, motors, electronic boards and other hardware attached to the Pi's GPIO pins.
"The idea is there's a tonne of people that know how to use Arduino and they can take their knowledge and apply it to this," Banzi told the Embedded Linux Conference 2018 in Portland in the US. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO
|
Scooped by
Gust MEES
|
Bastelplatine ist flotter und hat GBit-LAN Der Raspberry Pi 3B+ hat schnellere ARM-Prozessorkerne, es gibt ac-WLAN für das 5-GHz-Frequenzband und Gigabit-Ethernet. Der Preis der Bastelplatine beträgt 40 US-Dollar.
Pünktlich zum Pi-Tag erscheint der Raspberry Pi 3B+ der Rasperry Pi Foundation. Die Bastelplatine folgt auf den Raspberry Pi 3B und hat trotz der vermeintlich kleinen Namensänderung mehr Neuerungen integriert, als die Bezeichnung Raspberry Pi 3B+ impliziert. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi
|
Scooped by
Gust MEES
|
Today, at Embedded Linux Conference 2018, Arduino announced the expansion of the number of architectures supported by its Arduino Create platform for the development of IoT applications. With this new release, Arduino Create users can manage and program a wide range of popular Linux® single-board computers like the AAEON® UP² board, Raspberry Pi® and BeagleBone® as if they were regular Arduino boards. Multiple Arduino programs can run simultaneously on a Linux-based board and interact and communicate with each other, leveraging the capabilities provided by the new Arduino Connector. Moreover, IoT devices can be managed and updated remotely, independently from where they are located.
To further simplify the user journey, Arduino has also developed a novel out-of-the-box experience for Raspberry Pi and BeagleBone boards, in addition to Intel® SBCs, which enables anyone to set up a new device from scratch via the cloud without any previous knowledge by following an intuitive web-based wizard. Arduino plans to continue enriching and expanding the set of features of Arduino Create in the coming months. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO
|
Scooped by
Gust MEES
|
Magnet levitation toy using Arduino. Cheap and easy to make!.
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
Bisher waren Legos Roboterbausätze teuer und lockten mit ihrem Ingenieurs-Charme bestenfalls Erstsemester an. Boost soll nun auch die Jüngsten an das Programmieren heranführen.
Lust auf Lego? Das Set 17101 – Code-Name „Boost“ – hat einiges zu bieten. Herzstück ist der Move-Hub – ein per Bluetooth LE ansprechbarer Controller, an den sich bis zu zwei zusätzliche Aktoren/Sensoren anschließen lassen; er wird mit sechs AAA-Batterien bestückt. Zwei Motoren, ein Gyrosensor und eine RGB-LED sind im Move-Hub bereits integriert. Ein weiterer Motor und ein kombinierter Farb-/Entfernungssensor sind im Set enthalten. Der Move-Hub bildet die Basis für fünf spannende Grundmodelle vom klassischen Roboter über eine Technokatze bis zur Legofabrik. Die Modelle lassen sich per App in Bewegung setzen und programmieren. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=LEGO
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
I was very happy when I got delivered that nice looking 2.8 inches TFT with incorporated SDCard. I ordered it on Amazon and it is from ELEGOO. It was delivered with a small CD where a lot of coding examples are integrated and a well done manual. SO, I started as soon… Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO
|
Scooped by
Gust MEES
|
Xevro is run by software developer Louis D'Hont. I bought an Arduino, What now? Do you want to simulate a program for Arduino without using real components? Then this Arduino Simulator is definitely for you! Every time you want to test some project you don't need to add real parts anymore! The Simulator has all the components needed to test basic projects and even larger projects. Almost all the I/O is present on the Simulator so we can test your code on the monitor screen. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO
|
Scooped by
Gust MEES
|
Wire LibraryThis library allows you to communicate with I2C / TWI devices. On the Arduino boards with the R3 layout (1.0 pinout), the SDA (data line) and SCL (clock line) are on the pin headers close to the AREF pin. The Arduino Due has two I2C / TWI interfaces SDA1 and SCL1 are near to the AREF pin and the additional one is on pins 20 and 21. As a reference the table below shows where TWI pins are located on various Arduino boards. BoardI2C / TWI pinsUno, EthernetA4 (SDA), A5 (SCL)Mega256020 (SDA), 21 (SCL)Leonardo2 (SDA), 3 (SCL)Due20 (SDA), 21 (SCL), SDA1, SCL1 As of Arduino 1.0, the library inherits from the Stream functions, making it consistent with other read/write libraries. Because of this, send() and receive() have been replaced with read() and write().
|
Scooped by
Gust MEES
|
The Raspberry Pi Foundation has launched the Raspberry Pi 3 Model B+, offering a faster CPU and faster wireless throughput than its predecessor, the Raspberry Pi 3 Model B.
Raspberry Pi 3 Model B+ comes exactly two years after the launch of the Raspberry Pi 3 Model B and is in line with Raspberry Pi Foundation's two-year B+ 'evolution' upgrade.
In other words, the changes don't warrant calling it a Raspberry Pi 4, but there are noticeable improvements, including a faster processor, higher Wi-Fi speeds, and faster Ethernet. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi
|
Scooped by
Gust MEES
|
Two years ago, open electronics had produced “RandA“, an Atmega328-based board for Raspberry Pi to deliver the advantages of both, Raspberry Pi and Arduino. Earlier this month, an updated version of RandA has been released to be compatible with Raspberry Pi 3.
RandA is a development board that leverages the hardware equipment and the computing power of Arduino with its shields, and the enormous potential of the Raspberry Pi. It features Atmega328 microcontroller, has RTC (Real Time Clock) module, power button and sleep timer, connectors for 5 volts and connectors for mounting Arduino shield. Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Raspberry+Pi
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
|
Scooped by
Gust MEES
|
image2cpp is a simple tool to change images into byte arrays to use with (monochrome) displays suchs as OLEDs, like those from Adafruit or Sparkfun. While searching for a way to generate these arrays, I mostly found links to a piece of Windows software. Both the flakey results and the hassle of having to boot a virtual machine just to convert an image lead to me writing this pure html + javascript solution. Alternatively you can also enter a byte array as input to turn it back into an image. This might be useful for debugging, or when you want to write the byte array yourself. I don't know. Running the toolYou don't need any special dependencies / internet connection; all the necessary parts sit in a single .html file. So just open this index.html page in a (recent) browser to run the tool. Or you can use the online version at: http://javl.github.io/image2cpp/ Learn more / En savoir plus / Mehr erfahren: https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO BTW: Above shown image is my "MAUSI", which was the "Mascot" for my Cyber-Security courses in Luxembourg EDUcation in 2003-2007. Those courses were mandatory for students up from 12 years old (7èmes). Learn more about Cyber-Security in Luxembourg (Europe): https://gustmees.wordpress.com/2017/11/22/luxembourg-and-cyber-security-how-did-it-start/
|
Scooped by
Gust MEES
|
Die Arbeitswelt der Zukunft bedingt einen höheren Stellenwert der beruflichen Weiterbildung, so der Präsident des Bundesinstituts für Berufsbildung (BIBB), Friedrich Hubert Esser. "In einer Arbeitswelt von morgen mit steigenden Datenmengen, kürzer werdenden Halbwertszeiten von Wissen sowie einer erhöhten Flexibilität am Arbeitsplatz ist berufliche Weiterbildung schon lange nicht mehr Kür, sondern Pflicht", betont Esser in der aktuellen Ausgabe der BIBB-Fachzeitschrift "Berufsbildung in Wissenschaft und Praxis - BWP" mit dem Schwerpunktthema "Weiterbildung".
Der digitale Transformationsprozess, der Einsatz von Robotern sowie der wachsende Einfluss künstlicher Intelligenz sorge für bislang nicht gekannte strukturelle Verschiebungen in Arbeits- und Produktionsprozessen. Arbeiten und Lernen werden sich von Grund auf ändern. "Der Umgang mit leistungsstarken IT-Infrastrukturen sowie das Arbeiten und Lernen in Virtual- und Augmented-Reality-Umgebungen oder mithilfe von Erklärvideos und Tutorials sind längst keine Zukunftsmusik mehr", so der BIBB-Präsident weiter. Learn more / En savoir plus / Mehr erfahren: https://gustmees.wordpress.com/2016/09/19/some-practice-examples-that-will-influence-education/
|
Make your Maker-Life less stressful with some tips and tools You were certainly in some situations where you were shouting and swearing about situations when things didn't work as well as expected as you didn't have the right tools to finish a project... Well, I encountered as well such situations on projects and…
Learn more / En savoir plus / Mehr erfahren:
https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO